Issue 23

Pp. 1-3_Presentation
Pp. 4-6_Contents
Pp. 7-14_METHODOLOGY FOR ASSESSING TRACTION PROPERTIES OF A TRACTOR WITH A VARIABLE WEIGHT COUPLINGDownload

dx.doi.org/10.17683/ijomam/issue23.1

Pp. 15-29_DESIGN OF TERAHERTZ FILTER TEST DATA ACQUISITION AND PERFORMANCE EVALUATION SYSTEM BASED ON INTERNET OF THINGS AND ARTIFICIAL INTELLIGENCE ALGORITHMDownload

dx.doi.org/10.17683/ijomam/issue23.2

Pp. 30-43_KEY CONTROL TECHNOLOGIES OF STATCOM-APF-LCL COMPOSITE COMPENSATION DEVICE UNDER REMOTE TELEMETRYDownload

dx.doi.org/10.17683/ijomam/issue23.3

Pp. 44-51_APPLICATION OF “WHEELED” INDEXING MECHANISM IN PACKAGING PRODUCTION LINEDownload

dx.doi.org/10.17683/ijomam/issue23.4

Pp. 52-61_ASYMPTOTIC ANALYSIS AND REDUCED-ORDER MODELING OF A PASSIVE THROTTLE-BASED TEMPERATURE FLOW COMPENSATORDownload

dx.doi.org/10.17683/ijomam/issue23.5

Pp. 62-69_DESIGN OF COMPOSITE NANOGENERATOR FOR ENVIRONMENTAL ENERGY COLLECTIONDownload

dx.doi.org/10.17683/ijomam/issue23.6

Pp. 70-76_SINGULARITY TRAJECTORY ANALYSIS OF 6-SPS STEWART PLATFORMDownload

dx.doi.org/10.17683/ijomam/issue23.7

Pp. 77-87_MODELING ANOMALOUS SOLUTE TRANSPORT IN FRACTURED-POROUS MEDIUM WITH NONEQUILIBRIUM ADSORPTIONDownload

dx.doi.org/10.17683/ijomam/issue23.8

Pp. 88-100_A TIME-SERIES-BASED PERFORMANCE MONITORING AND FAULT EARLY WARNING SYSTEM FOR DISTRIBUTED SOFTWARE SYSTEMS USING IOT DATA AND MACHINE LEARNINGDownload

dx.doi.org/10.17683/ijomam/issue23.9

Pp. 101-110_THE REVOLUTION OF INTRAOPERATIVE IMAGING COMPARATIVE ANALYSIS BETWEEN TRADITIONAL TECHNOLOGIES AND AUGMENTED REALITY SYSTEMSDownload

dx.doi.org/10.17683/ijomam/issue23.10

Pp. 111-122_OPTIMIZATION OF BUS CONTROL STRUCTURE AND DESIGN OF INTELLIGENT DRIVING SYSTEMDownload

dx.doi.org/10.17683/ijomam/issue23.11

Pp. 123-138_DESIGN OF HIGH PRECISION CONTROL ALGORITHM FOR MULTI-AXIS MECHANICAL LINKAGE BASED ON TRANSFORMER MODELDownload

dx.doi.org/10.17683/ijomam/issue23.12

Pp. 139-149_EVALUATION OF THE FUEL EFFICIENCY A WHEELED TRACTOR EQUIPPED WITH AN ECVT TRANSMISSION DURING THE TRANSPORTATION OF PARTIALLY FILLED TANKSDownload

dx.doi.org/10.17683/ijomam/issue23.13

Pp. 150-158_INFLUENCE OF NICKEL AND GERMANIUM ON THE MECHANICAL PROPERTIES OF ALUMINUM ALLOYSDownload

dx.doi.org/10.17683/ijomam/issue23.14

Pp. 159-166_DEVELOPMENT OF COMPOSITE CHEMICAL FLOATING REAGENTS AND THEIR APPLICATION IN THE EXTRACTION PROCESS OF NON-FERROUS AND PRECIOUS METALSDownload

dx.doi.org/10.17683/ijomam/issue23.15

Pp. 167-177_KINEMATIC MODELING AND TRAJECTORY OPTIMIZATION OF INDUSTRIAL ROBOTIC ARMS USING D-H PARAMETERS, B-SPLINE CURVES, AND GENETIC ALGORITHMDownload

dx.doi.org/10.17683/ijomam/issue23.16

Pp. 178-196_RESEARCH ON ABNORMAL DETECTION OF POWER METERING DATA FOR ELECTROMECHANICAL INTEGRATED ENERGY CONVERTER BASED ON TRANSFORMERDownload

dx.doi.org/10.17683/ijomam/issue23.17

Pp. 197-208_MINIMISATION OF OPERATING CYCLE DURATION AND ENERGY LOSSES IN AN OVERHEAD CRANE TRAVELING MECHANISMDownload

dx.doi.org/10.17683/ijomam/issue23.18

Pp. 209-217_RESEARCH ON THE TREATMENT OF MEAT INDUSTRY WASTEWATER BY FILTRATION COMBINED WITH COAGULATIONDownload

dx.doi.org/10.17683/ijomam/issue23.19

Pp. 218-226_NUMERICAL STUDY OF MIXED CONVECTION HEAT TRANSFER USING OSCILLATING TWO CYLINDERS INSIDE A CAVITY FILLED WITH A HYBRID NANO FLUID CU-AL2O3-WATERDownload

dx.doi.org/10.17683/ijomam/issue23.20

Pp. 227-240_FUNCTIONAL DESIGN OF AN ECO-EFFICIENT PARKING LOT FOR ELECTRIC VEHICLES WITH PHOTOVOLTAIC PANEL INTEGRATION AND CHARGING STATIONSDownload

dx.doi.org/10.17683/ijomam/issue23.21

Pp. 241-253_REAL-TIME MONITORING AND FAULT DIAGNOSIS OF DISTRIBUTION NETWORKS BASED ON SYNCHRONOUS PHASOR MEASUREMENT TECHNOLOGYDownload

dx.doi.org/10.17683/ijomam/issue23.22

Pp. 254-267_DRONE-BASED AIR PURIFICATION TECHNOLOGIES_MAPPING THE EVOLUTION OF AN EMERGING ENGINEERINGDownload

dx.doi.org/10.17683/ijomam/issue23.23

Pp. 268-275_A RISK-ADJUSTED MULTI-METRIC SUPPLIER EVALUATION MODEL INTEGRATING PERFORMANCE AND STABILITY INDICATORS IN AUTOMOTIVE MANUFACTURINGDownload

dx.doi.org/10.17683/ijomam/issue23.24

Pp. 276-284_IMPLEMENTATION OF PRODUCING STEEL GRINDING BALLS USING SIX-START HELICAL CALIBRATED ROLLSDownload

dx.doi.org/10.17683/ijomam/issue23.25

Pp. 285-293_NONLINEAR TRACKING MOTION CONTROL BASED MULTI-VERSE OPTIMIZATION FOR MAGNETIC LEVITATION SYSTEMSDownload

dx.doi.org/10.17683/ijomam/issue23.26

Pp. 294-303_RESEARCH AND DEVELOPMENT OF CERAMIC COMPOSITIONS FOR BUILDING MATERIALS OF HISTORICAL AND ARCHITECTURAL MONUMENTSDownload

dx.doi.org/10.17683/ijomam/issue23.27

Pp. 304-315_RESEARCH ON TRANSMISSION LINE MOUNTAIN FIRE MONITORING AND EARLY WARNING TECHNOLOGY USING THERMIONIC IONIZATION AND MILLIMETER WAVE RADARDownload

dx.doi.org/10.17683/ijomam/issue23.28

Pp. 316-323_SULFATE-RESISTANT CEMENTS BASED ON TECHNOGENIC WASTE FROM NON-FERROUS METALLURGYDownload

dx.doi.org/10.17683/ijomam/issue23.29

Pp. 324-331_EXTENDED STATE OBSERVER-BASED OPTIMIZED SYNERGETIC CONTROL FOR PRODUCTION-INVENTORY SYSTEMSDownload

dx.doi.org/10.17683/ijomam/issue23.30

Pp. 332-346_INTERACTIVE PROGRAMMING OF FILAMENT WINDING OPERATIONS ON CNC MACHINESDownload

dx.doi.org/10.17683/ijomam/issue23.31

Pp. 347-356_ASSESSMENT OF THE EFFECT OF DIAMOND-SPARK GRINDING WITH THE USE OF SOLID LUBRICANTS ON THE FORMATION OF SURFACE ROUGHNESS OF A PARTDownload

dx.doi.org/10.17683/ijomam/issue23.32