Issue 16

Presentation

CONTENTS

pag. 7-17_MODELLING AND SIMULATION OF A PICK&PLACE SYSTEM USING MODELICA MODELLING LANGUAGE AND AN INVERSE KINEMATICS APPROACH

dx.doi.org/10.17683/ijomam/issue16.1

pag. 18-23_STUDY OF THE RHEOLOGY OF GAS-LIQUID MIXTURES FOR DETERMINING HYDRAULIC LOSSES DURING THEIR FLOW IN THE REPAIR OF OIL AND GAS WELLS

dx.doi.org/10.17683/ijomam/issue16.2

pag. 24-32_A METHOD TO EVALUATE TRANSMISSION EFFICIENCY OF GEAR REDUCER

dx.doi.org/10.17683/ijomam/issue16.3

pag. 33-41_ANALYSING THE RESPONSE OF A DUAL-FLOW TRANSMISSION (HMCVT) FOR WHEELED TRACTORS ACCORDING TO EFFICIENCY AND PRODUCTIVITY CRITERIA

dx.doi.org/10.17683/ijomam/issue16.4

pag. 42-49_DESIGN AND ANALYSIS OF PARALLEL ANKLE JOINT REHABILITATION ROBOT

dx.doi.org/10.17683/ijomam/issue16.5

pag. 50-57_TRENDS, CHALLENGES AND OPPORTUNITIES OF DIGITAL MANUFACTURING IN THE AGE OF INDUSTRY 4.0

dx.doi.org/10.17683/ijomam/issue16.6

pag. 58-66_A MODEL FOR EVALUATING THE MODAL FREQUENCIES AND ENVIRONMENTAL VIBRATION ENERGY HARVESTING CAPACITY OF RECTANGULAR PIEZOELECTRIC BEAMS

dx.doi.org/10.17683/ijomam/issue16.7

pag. 67-75_DESIGN AND MOTION CHARACTERISATION OF A WEARABLE LOWER LIMB REHABILITATION EXOSKELETON ROBOT

dx.doi.org/10.17683/ijomam/issue16.8

pag. 76-81_DESIGN OF A PROPOSED NEURAL NETWORK FOR SOUND QUALITY ANALYSIS OF DIFFERENT TYPES FOR CAR SYSTEMS

dx.doi.org/10.17683/ijomam/issue16.9

pag. 82-92_EFFECT OF DEPOSITION TEMPERATURE ON OPTICAL PROPERTIES OF ALUMINUM OXIDE THIN FILMS PREPARED BY ATOMIC LAYER DEPOSITION

dx.doi.org/10.17683/ijomam/issue16.10

pag. 93-98_OPTIMIZATION DESIGN OF THE CROSSBEAM FOR THE VIADUCT TYPE FIVE-AXIS GANTRY BORING AND MILLING MACHINING CENTRE

dx.doi.org/10.17683/ijomam/issue16.11

pag. 99-108_A STUDY ON THE ENERGY CONSUMPTION OF A MECHATRONIC DELIVERY SYSTEM WITH A SPIRAL USED IN AN INNOVATIVE ENERGY-EFFICIENT VENDING MACHINE FOR URBAN USE

dx.doi.org/10.17683/ijomam/issue16.12

pag. 109-118_VEHICLE AND PEDESTRIAN TARGET DETECTION MODEL UNDER COMPLEX TRAFFIC CONDITIONS

dx.doi.org/10.17683/ijomam/issue16.13

pag. 119-126_DEPOSITION METHOD OF COPPER NANOPARTICLES FROM COPPER SOLUTIONS USING ACTIVE METAL

dx.doi.org/10.17683/ijomam/issue16.14

pag. 127-137_RESEARCH ON THE WEAR FAILURE MECHANISM OF HIGH SPEED POSITIVE DISPLACEMENT MOTOR BEARINGS

dx.doi.org/10.17683/ijomam/issue16.15

pag. 138-145_ENERGY HARVESTING CONTROL OF CURRENT TRANSFORMERS BASED ON DYNAMIC IMPEDANCE REGULATION STRATEGY OF VOLTAGE SOURCE CONVERTER

dx.doi.org/10.17683/ijomam/issue16.16

pag. 146-155_DEVELOPMENT OF A MODULAR SLOTTING HEAD WITH A MODIFIED RACK-AND-PINION TRANSMISSION

dx.doi.org/10.17683/ijomam/issue16.17

pag. 156-162_DESIGN OF VIRTUAL DEBUGGING AND MONITORING PLATFORM FOR INDUSTRIAL ROBOTS

dx.doi.org/10.17683/ijomam/issue16.18

pag. 163-170_INFLUENCE OF A MAGNETIC FIELD ON HSS TOOL WEARLIFE AND THE INTENSITY OF EXTERNAL MACHINING ENVIRONMENTS IN TURNING

dx.doi.org/10.17683/ijomam/issue16.19

pag. 171-178_COMPARISON OF FATIGUE PERFORMANCE OF BELOW-KNEE PROSTHETIC SOCKETS FABRICATED VIA NOVEL, DIRECT AND LAMINATION TECHNIQUES

dx.doi.org/10.17683/ijomam/issue16.20

pag. 179-184_EFFECTS OF GERMANIUM (GE) ON HARDNESS AND MICROSTRUCTURE OF AL-MG, AL-CU, AL-MN SYSTEM ALLOYS

dx.doi.org/10.17683/ijomam/issue16.21

pag. 185-201_ADVANCEMENTS IN CELLULOSE_REDUCED GRAPHENE OXIDE COMPOSITES SYNTHESIS, CHARACTERIZATION AND APPLICATIONS IN TRANSISTOR TECHNOLOGIES

dx.doi.org/10.17683/ijomam/issue16.22

pag. 202-210_THE RESULTS OF SURFACE WASTEWATER TREATMENT OF A MACHINE-BUILDING ENTERPRISE FROM PETROLEUM PRODUCT CONTAMINATION

dx.doi.org/10.17683/ijomam/issue16.23