Issue 17

Pp. 7-15_3D VISION OBJECT IDENTIFICATION USING YOLOv8

dx.doi.org/10.17683/ijomam/issue17.1

Pp. 16-22_A NEW NONLINEAR ANALYTICAL CONTROL OF THE HUMAN KNEE JOINT OF PARAPLEGIC PATIENTS UNDER INITIAL KNEE ANGLE UNCERTAINTIES

dx.doi.org/10.17683/ijomam/issue17.2

Pp. 23-31_ANALYSIS AND RESEARCH ON OBSTACLE-CROSSING CHARACTERISTICS OF ARTICULATED VARIABLE-DIAMETER PIPE CLIMBING ROBOTS

dx.doi.org/10.17683/ijomam/issue17.3

Pp. 32-43_CONTACT INTERACTION OF BODIES ALONG CONGRUENT SURFACES

dx.doi.org/10.17683/ijomam/issue17.4

Pp. 44-53_CONSTRUCTION OF A MINIMUM CONTACT FORCE MODEL FOR VEHICLE ELECTRICAL CONNECTORS

dx.doi.org/10.17683/ijomam/issue17.5

Pp. 54-60_EXPERIMENTAL ANALYSIS OF FRICTION AND SLIDING FORCES IN THE PURE WHEEL – COMPOSITE BAR SYSTEM

dx.doi.org/10.17683/ijomam/issue17.6

Pp. 61-69_RESEARCH ON RUBBER OPTIMIZATION OF CONICAL BLOWOUT PREVENTER BASED ON RESPONSE SURFACE METHOD

dx.doi.org/10.17683/ijomam/issue17.7

Pp. 70-76_PRECISION COMPENSATION OF FLEXIBLE MOMENT FOR PRECISION MACHINE TOOL STRUCTURES

dx.doi.org/10.17683/ijomam/issue17.8

Pp. 77-86_PARAMETER OPTIMIZATION AND EXPERIMENTAL STUDY OF ORDERLY ARRANGEMENT GRINDING WHEEL

dx.doi.org/10.17683/ijomam/issue17.9

Pp. 87-95_TRANSFORMING LIBRARIES. THE ROLE OF AUTONOMOUS ROBOTS IN SORTING, INVENTORYING AND BOOK SEARCH

dx.doi.org/10.17683/ijomam/issue17.10

Pp. 96-104_DESIGN OF ANKLE JOINT REHABILITATION ROBOT AND EVALUATION OF REHABILITATION EFFECT

dx.doi.org/10.17683/ijomam/issue17.11

Pp. 105-113_THERMAL DEFORMATION SIMULATION ANALYSIS OF DUAL NOZZLES OF FOLDING ADDITIVE MANUFACTURING DEVICE

dx.doi.org/10.17683/ijomam/issue17.12

Pp. 114-124_DIGITAL TWINS FOR REAL-TIME MONITORING AND OPERATION OF COFFEE VALUE CHAIN AND SUPPLY CHAIN

dx.doi.org/10.17683/ijomam/issue17.13

Pp. 125-130_EFFECT OF SINGLE CONE GEOMETRY OF FRICTION AREA ON TENSILE STRENGTH OF CONTINUOUS DRIVE FRICTION DISSIMILAR WELD JOINT OF ROUND BAR ALUMINIUM A6061 AND STEEL S15C

dx.doi.org/10.17683/ijomam/issue17.14

Pp. 131-146_A REVIEW OF PAVEMENT DEFECT DETECTION BASED ON VISUAL PERCEPTION

dx.doi.org/10.17683/ijomam/issue17.15

Pp. 147-152_INFLUENCE OF LIQUID NITRIDING MODES ON THE MECHANICAL PROPERTIES OF HIGH-SPEED STEELS

dx.doi.org/10.17683/ijomam/issue17.16

Pp. 153-158_FORMATION OF THE STRUCTURE OF TOOL STEELS DURING HEAT TREATMENT WITH HEATING TO EXTREME TEMPERATURES

dx.doi.org/10.17683/ijomam/issue17.17

Pp. 159-165_INCREASE IN HARDNESS AND WEAR RESISTANCE OF CAST SAMPLES AND MACHINE PARTS WITH A SURFACE COATING AND THEIR HEAT TREATMENT

dx.doi.org/10.17683/ijomam/issue17.18

Pp. 166-177_COMMUNICATION MANAGEMENT FOR THE ACQUISITION OF DATA BETWEEN THE PC AND A DEVICE CALLED THE HYDROELECTRIC TURBINE DEPLOYED LINEARLY ON THE COURSE OF FLOWING WATER

dx.doi.org/10.17683/ijomam/issue17.19

Pp. 178-189_FAULT DIAGNOSIS OF DRIVING GEAR IN RACK AND PINION DRIVES BASED ON PLANAR DOT PATTERN AND SPARSE REPRESENTATION

dx.doi.org/10.17683/ijomam/issue17.20

Pp. 190-197_ANALYSYS OF THE MOVEMENT OF AN EXCAVATOR’S ARMHANDLE ASSEMBLY USING A DRONE TO OPTIMIZE THE DIGGING PROCESS

dx.doi.org/10.17683/ijomam/issue17.21

Pp. 198-207_PEDESTRIAN TRAJECTORY PREDICTION WITH ATTENTION AND SOCIAL BEHAVIOR INTEGRATION

dx.doi.org/10.17683/ijomam/issue17.22

Disclaimer

The information and opinions presented in the Journal reflect the views of the authors and not of the Journal or its Editorial Board or of the Publishing House. Neither the International Journal of Mechatronics and Applied Mechanics nor its publishers or anyone else involved in creating, producing or delivering the International Journal of Mechatronics and Applied Mechanics or the materials contained therein, assumes any liability or responsibility for the accuracy, completeness, or usefulness of any information provided in International Journal of Mechatronics and Applied Mechanics, nor shall they be liable for any direct, indirect, incidental, special, consequential or punitive damages that originate in the use of the International Journal of Mechatronics and Applied Mechanics.
The International Journal of Mechatronics and Applied Mechanics cannot and does not offer warranties that the information contained herein is in every respect accurate or complete, nor are they responsible for any errors or omissions or for the results obtained from the use of said material. Readers are encouraged to confirm the information contained herein with other sources.